| |
Repsol HELIOTERMO 2550
Description
A product developed especially to be used as heat transmission fluid. It is made of selected bases, with additives included in order to achieve an extraordinary resistence to rusting, which is required for high temperatures which are normal in thermal circuits. It is a specific oil to be used in heat transmission systems, in which temperatures do not exceed 300¡İC.
Qualities
Great thermal stability.
Long useful life in service.
Wide range of operational temperatures.
Easy control of temperature.
Good cuota of heat transmission.
Low steam pressure.
Low tendency to the formation of carbonous residues.
It is not corrosive.
Quality Level
ISO 6743/12-QB
DIN 51502-Q
Technical propertie -
- |
UNITS |
METHOD |
VALUE |
Density at 15¡İC |
g/cm3 |
ASTM D 4052 |
0,875 |
Viscosity at 40¡İC |
cSt |
ASTM D 455 |
37 |
Viscosity at 100¡İC |
cSt |
ASTM D 455 |
5,7 |
Viscosity Index |
- |
ASTM D 2270 |
95 |
Pour Point |
¡İC |
ASTM D 97 |
-15 |
Flashing point |
¡İC |
ASTM D 92 |
220 |
Thermal stability |
¡İC |
- |
300 |
Available in
Bulk and 185 Kg. Drums.
Hazard Identification
This product is not classified as toxic or hazardous under current legislation.
Handling
Certain minimum precautions to avoid prolonged contact with the skin should be taken when handling. The use of gloves, visors or masks is recommended in order to avoid splashes.
Health and safety hazards
Inhalation: Minimum risk of inhalation as it is a non-volatile product.
Ingestion: Does not provoke vomiting. Drink water. Seek medical assistance.
Contact with Skin: Wash with abundant water and soap.
Eyes: Wash with abundant water.
General measures: Seek medical assistance.
Fire fighting measure
No special measures are required.
Fire control: Foams, dry chemicals, CO2, water spray. Do not apply water jet directly as this may cause the product to spread.
Environmental precautions
Danger of physical contamination in the case of spillage (water flows, coastal areas, the ground, etc.) due to its floating capacity and oily consistency which may cause damage to fauna and flora with which it comes into contact. Avoid its penetration into water containers or outlets. Decontamination and cleaning: Treat as an accidental oil spillage. Avoid spreading by using mechanical barriers and eliminate using both physical and chemical means.
Unless otherwise specified, the values cited in technical characteristics should be considered typical. |
|
